• elite-wheel 0
    Cart Total: items

    Your cart is currently empty..

Elitewheels carbon spoke wheelset Rim brake PE 40 & PE 50 performance racing wheelset ceramic bearing

stars, based on ( 0 ) review
$1599.00now$1039.00 pair
100items available
Contact Us

1500.jpg


Aero carbon spoke图3.jpg


   Carbon fiber spokes have higher stiffness and higher tensile strength, and the lateral response is 7% higher than that of the same steel spokes, and the high frequency vibration absorption capacity of carbon spokes is stronger than that of steel spokes.It can provide better aerodynamics and excellent stability, allowing you to have an advantage in full sprint and high-power climbing.











图6.jpg




Ceramic Bearings


  Both front and rear hubs use S&S ceramic bearings,ceramic bearings further increase hub rolling efficiency with lower rolling resistance.At the same time, the non-driving side of the front and rear hubs have bearing pre-tightening side covers.









详1.jpg

Performance hub


   The front and rear hubs use 6902 bearings. The larger the bearing, the better the rigidity. On the premise of ensuring the performance output of the hub, we try to reduce the weight on the hub body and minimize the rolling resistance.

The  hub uses 18 spokes on the front wheel,  The rear hub has 21 spokes, 14 on the drive side and 7 on the non-drive side.

After 6 months of continuous design and continuous improvement, we have found the best geometric angle of the hub so that the spoke tension on the driving side is the same as the tension on the non-driving spoke side, which is very important. In this way, the stability of the wheels can be improved to a greater extent when entering a curve quickly.





详2.jpg

Tubeless compatible


   All PE wheel series are tubeless compatible, if you want to use tubeless tire, we will be equipped with tubeless rim tape and tubeless valve.















详5.jpg




High TG brake surface

  

        The brake surface uses a mixture of 270 degrees Celsius high temperature resin and T800 material, and also adds a drain groove, regardless of dry weather or wet weather, the performance of the brake side has a good performance.








SPECIFICATIONS


PE40
RIM
SPOKE
SERIESPE40
FRONT SPOKE PATTERNRadial
RIM TYPETubeless compatible
REAR SPOKE PATTERNRadial
RIM WIDTH40mm
SPOKE COUNT18F/21R
INNER WIDTH19.5mm
SPOKE TYPECS-01
OUTERWIDTH29mm
NIPPLE TYPEAlloy secure lock
HUB
OTHER
FRONT HUBQr*100 ceramic bearing
ASSEMBLY METHODHandbuilt
REAR HUBQr*130 ceramic bearing
EXTRASSpokes,nipples,skewer, brake pads,rim tape
BRAKE INTERFACE Rim brake
WEIGHTF.585g  R.715g
HUB TYPEYAn R28
SYSTEM WEIGHT LIMIT275lbs / 125kg
CASSETTE BODYSHIMANO
RECOMMENDED TYRE SIZES25 to 32mm
PE50
RIM
SPOKE
SERIESPE50
FRONT SPOKE PATTERNRadial
RIM TYPETubeless compatible
REAR SPOKE PATTERNRadial
RIM WIDTH50mm
SPOKE COUNT18F/21R
INNER WIDTH19.5mm
SPOKE TYPECS-01
OUTERWIDTH29mm
NIPPLE TYPEAlloy secure lock
HUB
OTHER
FRONT HUBQr*100 ceramic bearing
ASSEMBLY METHODHandbuilt
REAR HUBQr*130 ceramic bearing
EXTRASSpokes,nipples,skewer, brake pads,rim tape
BRAKE INTERFACE Rim brake
WEIGHTF.619g  R.748g
HUB TYPEYAn R28
SYSTEM WEIGHT LIMIT275lbs / 125kg
CASSETTE BODYSHIMANO
RECOMMENDED TYRE SIZES25 to 32mm



carbon spoke

700c carbon wheelset


TECHNOLOGY


carbon wheel

carbon spoke

CHA/Customized spoke hole angle

All spoke hole angles must be customized according to the geometric angle of the hub.all drilled holes are inspected to ensure they are free of burrs.You can request a customized drilling pattern if you have a unique wheel build.

TRD/Tubeless R angle design

All yuan an bike are tubeless compatible.We design a R angle,The rounded edge makes tire installation easier and offers increased support during hard cornering with a softer edge and larger surface area.

LMS/lighter materials improve the strength

We use lighter materials and make full use of the combination of T700 and T800 to improve the strength.

SIW/smooth Inside Wall

We use a specific, thinner, high-pressure air bladders to control the inner wall smoothness, and the inner wall air bladders can be extracted clean at one time, without residue, not only effectively improve the tightness of the carbon fiber yarn, but also allow the spoke cap to be more tightly integrated with the spoke hole

OPT/one piece technology

Compared to the technology of 3 piece, our one piece tech is more technically difficult and takes longer to produce, but the rigidity of the rim is at least 7% higher

BLT/Bead Lock technology

The bump on the rim bed helps to create a buffer during tire inflation, making the mounting process easier. When the tire is mounted, the raised portion reinforces the tire bead, making it harder to “burp” or fall back into the drop channel.

Brand:
Elitewheels
Series Name::
PE40 & PE50
Size::
700c
Spoke Hole::
18-21H
Hub::
Ceramic bearing
Spoke: :
Carbon
Warranty: :
3 years
Freebody:
Shimano
Axle:
Front:QR*100mm.Rear:QR*130mm
Brake interface::
Rim brake
Type:
Clincher /Tubeless
Recent Reviews
+